Kits include: Disc & Spring assembly, Cover O - ring and lubricant.
組件包括: 閥瓣 和 彈簧總成, 閥蓋O形環和潤滑劑.
互聯網
The O - ring seal material shall be manufactured from EPDM.
形環密封材料應該由三元乙丙橡膠制造.
互聯網
O - ring of the spindle or core hole of body is damaged.
軸心使用O環受損或主體心孔損傷.
互聯網
Kit consists of: Relief Valve Assembly, RV Spring, and RV Cover O - ring.
組件包括: 安全閥總成, 安全閥彈簧, 和安全閥閥蓋O形環.
互聯網
Kit includes: Disc assembly, Spring assembly and Cover O - ring.
組件包括: 閥瓣總成, 彈簧總成和閥蓋O形環.
互聯網
Valve should be tighten with O ring rubber with max . 25 % compression.
閥門的密封需通過“O”型密封圈實現,密封圈最大壓縮量不允許超過25%.
互聯網
Remove the relief valve assembly ( includes cover O - ring, stem and diaphragm assembly ).
拆卸安全閥總成 ( 包括閥蓋O形環, 閥桿和隔膜總成 ).
互聯網
Kits consist of: Bonnet, Bonnet O - ring and vent spring.
組件包括: 閥蓋, 閥蓋O形環和排氣口彈簧.
互聯網
If O - ring is to be replaced, lubricate as above.
如果更換O 形 環, 也要向上述那樣潤滑.
互聯網
The sealing structure and principle of hollow metal O ring was introduced.
介紹了金屬空心O形圈的密封結構和密封機理.
互聯網
Lubricate O - ring with power steering fluid and install into the housing.
用動力轉向油潤滑O型環,并將其安裝在外殼上.
互聯網
Kit includes: Seat, Seat oring, Retainer Wire and Cover O ring.
組件包括: 閥座, 閥座O形環, 固定器線圈和閥蓋O形環.
互聯網
Kits consist of: Vent disc, Check disc and Bonnet O - ring.
組件包括: 排氣閥瓣, 止回閥閥瓣和閥蓋O形環.
互聯網
Lubricate new O - ring Seal with Mopar Power Steering Fluid or equivalent.
用mopar動力轉向油液或同類產品潤滑新的O型環油封.
互聯網
Remove the pressed in valve seat and seat O - ring.
拆卸壓進去的安全閥閥座和閥座O形環.
互聯網